Australian Thermal Coal
Minimum Order Quantity: 30 Tonne
|Burning Time||Long Flame|
Metallurgical coal is low in ash, moisture, sulfur and phosphorus content, and its rank is usually bituminous. Some grades of anthracite coal are used for sintering, pulverized coal injection, direct blast furnace charge, pelletizing, and in production of ferro-alloys, silicon-manganese, calcium-carbide and silicon-carbide. Metallurgical coal produces strong, low-density coke when it is heated in a low-oxygen environment. On heating, the coal softens, and volatile components evaporate and escape through pores in the mass. During coking, the material swells and increases in volume.
The coking ability of coal is related to its physical properties such as its rank, but laboratory testing is required to completely evaluate the coking ability of a coal. The strength and density of coke are particularly important when it is used in a blast furnace, as the coke supports part of the ore and flux burden inside the furnace. Metallurgical coal contrasts with thermal coal, which does not produce coke when heated. Because of their different end-uses, prices for the two types of coal are usually quite different.
The suitability of coal for conversion to coke is also referred to as the caking ability. We have good quality of coking coal. at Haldia Port anytime. You can check specification given in Shipment report.
Minimum Order Quantity: 30 Tonne
|Packaging Size||0-500 mm|
|Color||Dark Black Brown|
|Brand||Barmer Sonri / Giral Mines|
|Coal Calorific||3100 CV (DB)|
Barmer Lignite, often referred to as brown coal, is a soft brown, combustible, sedimentary rock formed from naturally compressed peat. It has a carbon content around 25 to 35 percent, and is considered the lowest rank of coal due to its relatively low heat content. But, now a days, Indonesian coal prices are going very high. So, Lignite is the best option for industries due to its cheapest rate, availability for 12 months and GCV Value is 3000 / 3200 CV (DB). However, its ash content is so high but its rate are consumer friendly. We are dealing in Barmer Lignite. If any need, kindly contact us.
|Place Of Origin||india|
Established in the year 1996, we, "Shubham Corporation" distinguished Manufacturer, Bulk Trader Importer and Exporter of a qualitative range of USA Coal, Australian Coal, Indonesian Coal and Indian Steam Coal. This superior variety of coal is sourced from leading Importers, with an assurance of impeccable quality. Known for its high carbon, low ash, and high thermal efficiency, this coal is widely demanded in the market. Various industries including Paper, Steel, Textile & Processing, Power, Leather & Rexene, Brick Kilns, Ceramic, Cement plants and other sectors use coal for varied purposes.
We are assisted by our team of professionals, which makes sure that the procured range is compliant with the established norms of the industry. The clients can avail these products from us as per their requirements in terms of quality and variety. By ensuring an effective quality control program, we offer premium grades of coals. Also, these different varieties of coal are stored in our spacious stockyard, separately.
Under the experienced and qualified guidance of our mentor, “Mr. Samir Jain”. We have gained an indomitable presence in the market. His principled approach and keen business acumen have been acting as the fuel behind our phenomenal growth in this domain.